Sorry, you need to enable JavaScript to visit this website.
hamburger overlay

how-to videos

Setting up and using your Accu-Chek Aviva meter and Accu-Chek FastClix lancing device

Frequently Asked Questions

Special features

Control test values will not be in the user-accessible memory. However, they will be stored in the downloadable memory.

Up to 4 test reminders can be set per day, in 15-minute increments. At the set reminder time(s), a series of beeps will sound every 2 minutes, up to 3 times per reminder. The reminder beep will not occur if the meter is on at the set time, or if the user runs a test 15 minutes or less before the set reminder time. If the user turns on the meter while the reminder is sounding, the series of beeps for that reminder will stop.

Meter care and batteries

  1. Open the battery door on the back of the meter by pushing the tab in the direction of the arrow and pulling the door up.
  2. Remove the old battery. Insert the new battery with the (+) side facing up.
  3. Put the battery door back in place and snap it closed.

With the Accu-Chek Aviva meter turned on and the flashing strip symbol on the display, press and hold the ON/OFF button for about 4 seconds until "set-up" and the hour is flashing on the display.

Press and hold the ON/OFF button until the flashing strip symbol appears.

General questions

The Accu-Chek Aviva blood glucose monitoring system checks for potential issues. It achieves this by combining the power of technologies in the meter, the code chip, and test strips with 6 gold electrodes to perform extensive quality checks during each test.

These include:

  • Sample checks
    • Verify the correct amount of blood is applied
    • Show user if more sample is needed
    • Detect whether sample is blood or control solution
  • Strip checks
    • Check test strips and reagent for potential damage/abuse
    • Exposure to high humidity
    • Scratches on strip electrodes
    • Meter is designed to compensate for humidity or temperature or to produce an error message if unable to compensate
  • Meter checks
    • Check for variations in:
      • Hematocrit
      • Humidity
      • Temperature

These checks start when the meter is turned on and are complete when a blood glucose result is shown.

In the UK and Ireland it is not approved for use in clinical settings, although the Accu-Chek Aviva system is cleared to test capillary, venous, arterial, and neonatal blood samples.

Checking blood sugar

The Accu-Chek Aviva meter automatically recognises Accu-Chek Aviva control solutions, so running a control test is easier than ever. First, wipe the tip of the control bottle. Then put the meter on a flat surface, insert the test strip, and squeeze a drop of the control solution onto the front edge of the test strip. A result appears with a flashing “L”. Press one of the arrow keys once to indicate a Level 1 control test or twice to indicate Level 2. Press the ON/OFF button to set the level in the meter. The control result and “OK” alternate in the display if the result is in range.

The user will receive an error message if the control result is out of range.

Test strips, coding and control tests

The target expiration date is 18 months from the date of manufacture.

Before the user doses the test strip, the Accu-Chek Aviva meter runs quality checks of the strip chemistry to make sure the strip will give a valid test result. This ensures that the strip has not been exposed to outside environmental factors, such as humidity.

No. Accu-Chek Aviva meters are designed exclusively for use with Accu-Chek Aviva test strips.

VIEW ALL FAQs

See Health and Safety Information

Still can't find what you need?

We welcome your feedback

GO

Accu-Chek Aviva

Item Description

A sleek new design provides you with discrete, easy testing. With no coding or set up required, the meter comes ready to use straight out of the box.

  • Easy. A large visual display and easy to handle test strips means the Accu-Chek Aviva system provides dependable, easy testing and no coding required.
  • Accurate. The Accu-Chek Aviva system exceeds international accuracy requirements1, allowing peace of mind to test confidently and act on reliable results.
  • Trusted. Accu-Chek consistently provides high quality products and has done for over 40 years, with the Accu-Chek Aviva system being our most popular system in the UK and Republic of Ireland.

1 Freckmann et al., “System Accuracy Evaluation of 43 Blood Glucose Monitoring Systems for Self-Monitoring of Blood Glucose according to DIN EN ISO 15197”, Journal of Diabetes Science and Technology, Vol. 6, Issue 5, September 2012

Product Manuals

Size

94 x 52 x 21 mm (LHW)

Display

LCD

Test strip

Aviva test strip

Lancing device

Accu-Chek FastClix

Benefits and Features
  • User-friendly design. A sleek design with a large, easy-to-read display and easy to handle test strips, the Accu-Chek Aviva meter offers a comfortable, discreet choice for blood glucose testing.
  • Tiny blood sample. Quick fill, reliable Accu-Chek Aviva test strips require only 0.6µL of blood.
  • No coding. The Accu-Chek Aviva no longer requires a code chip, making the testing process quicker and easier.
  • No set-up required. There is no initial set-up required and as the meter does not require coding, it is ready to use straight out of the box.
  • Pre and post meal test reminders. The user can set up to 4 automatic reminders for different times throughout the day, to help remember when to test.
  • Battery backup. An additional small battery in the meter keeps the time and memory for up to 72 hours when the main battery is removed or out of power
Technical specifications
Display:

LCD

Auto Power Off:

After 2 minutes undisturbed with strip inserted, or if powered on but left undisturbed for 2 minutes

  • Auto power on with strip insertion
  • Auto off 90 seconds after test if strip is not removed
  • Auto off 5 seconds after strip removed
  • Auto off 2 minutes if meter is not used
Sample Size:

 0.6 µL

Power Supply:

one 3-volt lithium battery (type CR2032)

Battery life:

approximately 1000 readings (1 year with 3 tests per day)

Measurement Time:

Approximately 5 seconds

System Operating Conditions:

8°C to 44°C (46°F to 111°F)

Meter Storage Conditions:

-25°C to +70°C (-13°F to +158°F)

Memory:

Up to 500 total results, plus 20 control tests

Dimensions:

94 x 52 x 21 mm

Weight:

59 g with battery

Construction:

Handheld

Data transfer:

Infrared (IR)

Test Principle:

Electrochemical

Test Averages:

7, 14, 30 and 90 days

Safety features:
  • Hypo indicator
  • 4 customisable test reminders
  • Pre and post meal test reminders
  • General flag