Accu-Chek Guide Link Error codes Sync Time The meter time and date have been changed to match the paired pump. E-10 Time/Date Error The time and date setting may be incorrect. Battery icon The batteries are almost out of power. Blank Display The meter will not turn on or the display is blank. Auto-Send Failed The blood glucose result has not been sent to the pump. Average after meal 7 days There are no test results in range for the selected data. E-1 Strip Error The test strip may be damaged, not properly inserted, or was… Time/Date When paired to a pump, the meter time and date cannot be… E-10 Time/Date Error The time and date setting may be incorrect. E-11 Test Error The test strip may be damaged. E-12 High Ascorbate Your blood sample may contain a high level of ascorbate. E-13 Strip Error Fluid or foreign material may be present in the test strip… E-14 Electronic Error An electronic error has occurred. E-3 Test Error A meter or test strip error has occurred. E-4 Drop Too Small Not enough blood or control solution was drawn into the test… E-6 Drop Applied Early Blood or control solution was applied to the test strip before… E-7 Electronic Error An electronic error occurred. E-8 Temperature Error The temperature is above or below the proper range for the… E-9 Replace Batteries The batteries may be out of power. Flight Mode Active - Pairing not allowed Pairing to a pump cannot be performed while in Flight Mode. Flight Mode Active - Setting saved A meter setting was changed while in Flight Mode. High BG Data There are no results stored for the selected data. Invalid Date The date entered is not valid. HI Blood glucose may be higher than the measuring range of the… LO Blood glucose may be lower than the measuring range of the… Logbook - Invalid result There is an invalid result in the Logbook. Logbook - No stored results There are no results in the Logbook. Low BG Data There are no results stored in the meter for the selected data. Low/High Data Target Ranges is Off, there are no results stored in the meter. Pairing Failed The meter was unable to pair with a pump. Patterns - No active patterns available No active patterns available. Patterns - No data available Patterns is Off. Results Excluded - Averages One or more blood glucose results are excluded from the… Results Excluded - Low/high data One or more blood glucose results are excluded because the… Results Excluded - Target % One or more blood glucose results are excluded from the… Target % Target Ranges is Off. Target % after meal 7 days There are no test results in range for the selected data. Transfer Not Allowed Data cannot be sent to the paired pump because the meter is in… Transfer Failed Blood glucose results were not transferred to the paired pump. Test Not Allowed The meter is connected to a USB cable and a test cannot be… Transfer Not Allowed Data cannot be sent to the paired pump because the meter is in… View all error messages Product Support Downloads & Guides FAQs
