Device Settings

How to change the time and date on the Accu-Chek Guide Link meter
  1. Turn the meter on by briefly pressing “OK.” From the main menu, press the arrow key to highlight settings. Press “OK.”
  2. Time/date is highlighted. Press “OK.”
  3. Press the up or down arrows to adjust each field. Press “OK” to set and proceed to the next field. Set AM or PM if necessary.
  4. Press “OK” to save and return to the previous menu.

Note: Feature is only available if the meter is not paired with a pump. If paired with a pump, the meter time and date are automatically set to the pump’s time and date during communication.

Other FAQ categories

Check other FAQ categories by clicking on the below category names below